Vehicle Charging Lead
The 12V vehicle charging lead will charge a locator’s Li-Ion rechargeable battery pack from an automotive cigarette lighter socket. This 12ft/4m lead makes it easy to stay charged up while on the go.
vLoc3 Accessory A-Frame
The vLoc3 Series Accessory A-Frame accessory is used to detect ground faults on pipes and cables. In the case of pipes, the faults consist of coating defects. In the case of cables, faults are usually caused by insulation damage that allows the metallic sheath (or internal conductor) to contact the ground. It is intended to...
Rechargeable Receiver Battery
The rechargeable battery kit for the vScan receiver is supplied with a charger assembly and custom Lithium-ion battery. Lithium-ion batteries are high capacity, do not develop a memory and can hold a charge for an extended amount of time.
Remote Identification Antenna with SiS
The Remote Antenna can be used to help identify a cable in a cable tray, where cables are bunched together, or in proximity making it impossible to use a conventional locator. When used with the vLoc3-5000 receiver with SiS (signal select mode), the SiS mode becomes a powerful tool that easily identifies a particular cable on a cable tray or...
Live Cable Connector
The Live Cable Connector is usable on live cables up to 480 V ac 60/50Hz. The Live Cable Connector operates on frequencies of 8kHz, 33kHz and SIS. The Transmitter provides power in, the output leads from the separation filter can be connected to conductors carrying up to 480V AC. Note that the Live...
Ground Extension Spool
Use the extension spool to extend the ground connection to reach a suitable grounding position. Extending the ground allows the user to move the ground lead to various positions to help the transmitters signal to travel further. By extending the length of the ground lead the user can use locate tactics such as...
Clamp Extension Rod
The Clamp Extension Rod is a plastic non-conductive rod with male and female threads at opposite ends. This hardware allows the extension rod to be connected and extend the length. A transmitter signal clamp attached to the extension rod can now be safely used on lines in trenches and manholes. Extendable lengths Use...
Transmitter Signal Clamps
Signal Clamps provides a precise way to apply a locating signal. It is generally used when it is not possible or convenient to access the conductor to make a direct connection but there is sufficient room to place the clamp around the cable or pipe, or when it is not safe to make a...
Receiver Carry Bag
The vLoc3 series Receiver Carry Bag has room to comfortably carry the vLoc3-Pro, vLoc3-5000 or vLoc3-Cam receiver along with the user manual and battery charger. The bag has a double ended heavy duty zipper for easy fast access to the receiver.
Loc3 Series Transmitters Li-ion Rechargeable Battery
The rechargeable battery kit for the Loc3 Series Transmitters are supplied with a charger assembly and custom Lithium-ion battery. Lithium-ion batteries are high capacity, do not develop a memory and can hold a charge for an extended amount of time. Output Power Alkaline ...
vLoc3-MLA (Marker Locator Adapter)
The vLoc3-MLA (Marker Locator Adapter) is designed for easy, fast and accurate location of buried EMS markers. Once located the MLA will give depth of cover to the buried marker with the touch of a button. The MLA attaches to the bottom of vLoc3-Pro, vLoc3-XLF, vLoc3 RTK-Pro, vLoc3-9800 and vLoc3-5000 receivers. When attached and...
Receiver Extension Rods
The vLoc3 series Extension Rods are inert extensions that mount to the base of a vLoc3 series receiver. When attached it will increase the overall height of the receiver by 30cm/12” or 91cm/36”. When activated the receiver’s software will compensate for the additional height to assure that all depth and current readings remain correct....