Page 21 – Vivax-Metrotech

Locating Short Drops and Fault Locating

March 1, 2018August 8, 2018

By Steve Benzie Anyone who has been cable locating will be quick to point out a few useful facts that help locate a cable or pipe. These may include: • Always try to use a low frequency, • Make sure the line has good continuity, • Make sure both ends are well earthed,...

Receiver Carry Bag

February 20, 2018November 20, 2018

The vLoc3 series Receiver Carry Bag has room to comfortably carry the vLoc3-Pro, vLoc3-5000 or vLoc3-Cam receiver along with the user manual and battery charger. The bag has a double ended heavy duty zipper for easy fast access to the receiver.

Loc3 Series Transmitters Li-ion Rechargeable Battery

January 18, 2018December 25, 2018

The rechargeable battery kit for the Loc3 Series Transmitters are supplied with a charger assembly and custom Lithium-ion battery. Lithium-ion batteries are high capacity, do not develop a memory and can hold a charge for an extended amount of time. Output Power Alkaline ...

vLoc3-MLA (Marker Locator Adapter)

January 14, 2018March 10, 2022

The vLoc3-MLA (Marker Locator Adapter) is designed for easy, fast and accurate location of buried EMS markers. Once located the MLA will give depth of cover to the buried marker with the touch of a button. The MLA attaches to the bottom of vLoc3-Pro, vLoc3-XLF, vLoc3 RTK-Pro, vLoc3-9800 and vLoc3-5000 receivers. When attached and...

Receiver Extension Rods

December 14, 2017July 10, 2022

The vLoc3 series Extension Rods are inert extensions that mount to the base of a vLoc3 series receiver. When attached it will increase the overall height of the receiver by 30cm/12” or 91cm/36”. When activated the receiver’s software will compensate for the additional height to assure that all depth and current readings remain correct....

vLocCam2 Sonde & Camera Locator

November 26, 2017November 27, 2018

The vLocCam2 sonde locator comes standard with sonde/camera frequencies of 3kHz, 512Hz, and 640Hz. The vLocCam2 receiver comes with two passive locate modes of Power and Radio which will detect the presence of power lines, CATV, telephone and some metallic ipes which radiate 50/60 Hz from nearby or overhead power lines and induced VLF signal...

vLoc-9800 Receiver

November 26, 2017November 27, 2018

The vLoc-9800 is the updated version of the popular legacy 9860XT and 9890XT locators. With updated modern technology, we have combined the best of both legacy locators into the vLoc9800. The vLoc-9800 provides simplicity and fast performance with distance sensitive Left/Right Guidance™ and full automatic gain with the option to switch to manual....

Loc-5STx 5-Watt Transmitter and Loc-5DTx 5-Watt Dual Output Transmitter

November 17, 2017December 4, 2019

The Loc-5STx broadband transmitter has selectable induction frequencies from 8kHz to 200kHz and direct-connect frequencies from 512Hz to 200kHz. SD (Signal Direction), fault find and true resistance measurement up to 1 Mohm are all standard. The two inch by one-inch back-lit dot matrix display shows output current, connection type, volts, resistance, frequency, volume,...

Loc-10Tx 10-Watt Series Transmitters

October 17, 2017December 17, 2018

The Loc-10Tx broadband transmitter has selectable induction frequencies from 8kHz to 200kHz and direct-connect frequencies from 512Hz to 200kHz. SD (Signal Direction), fault find and true resistance measurement up to 1 Mohm are all standard. The two inch by one-inch backlit dot matrix display shows output current, connection type, volts, resistance, frequency, volume,...

vLocML2+ Receiver

September 21, 2017August 21, 2019

The vLocML2+ Receiver is an extended version of the popular vLocPro2 with the addition of the ability to locate buried electronic markers. The vLocML2+ comes with passive modes of Power and Radio, a range of preloaded active frequencies from 50Hz to 200kHz, Sonde Mode, SD (Signal Direction) mode and Electronic Marker modes. The vLocML2+ has an internal memory to...

vLocDM2 Receiver

September 20, 2017April 5, 2020

The vLocDM2 (Defect Mapper) uses the latest locating and signal processing techniques to plot the current gradient of an industry standard low frequency (3Hz or 4Hz) profiling current. The current is applied at CP stations, so the disruption of the pipeline can be minimized. The non-intrusive measuring device, the vLocDM2 receiver, takes measurements along the...

vLocPro2 (VLP2) Receiver

September 19, 2017December 30, 2020

The vLocPro2 (VLP2) utility locator receiver was designed to meet the tough requirements of the modern world. With more and more utilities being buried each day and also abandoned each day, it truly is a jungle beneath the ground. Today’s locator must not only trace the path of a buried utility, it must assure the...