Page 15 – Vivax

GPS Receiver

July 12, 2018October 15, 2018

The Garmin GLO™ brings you the best of both worlds by combining GPS/GLONASS receivers with Bluetooth® technology so you can enjoy precise position information on your iPad, iPhone or Android device. The Garmin GLO™ can receive position information from both the GPS and GLONASS satellite constellations, allowing it to connect to up to...

Bluetooth Modules

July 12, 2018July 15, 2019

As an optional extra the vLoc3-Pro and vLocML3 receivers can be fitted with a Bluetooth communications accessory. This allows communication with external devices such as GPS and or Dataloggers. The Bluetooth option can be retrofitted and can be ordered at a later date if preferred. vLoc3 series module for vLoc3-Pro vLoc2 series...

Rechargeable Transmitter Battery

July 12, 2018August 23, 2018

The rechargeable battery kit for the vScan transmitter is supplied with a charger assembly and custom Lithium-ion battery. Lithium-ion batteries are high capacity, do not develop a memory and can hold a charge for an extended amount of time.

Sondes

July 12, 2018December 12, 2023

Sondes are small self-contained battery powered transmitters. Sondes are propelled through non-metallic pipes and ducts and can be located on the surface by a sonde locator or buried utility locator with a sonde mode. Sondes are also built into other products such as a sewer push camera, robotic crawler camera, or attached to...

Direct Connection Lead with Heavy Duty Clips

July 12, 2018January 20, 2021

The direct connection lead consists of two cables, one (red clip) must be connected to the conductor being located, the other (black clip) to a suitable ground (a ground stake is provided with the transmitter). A few options are available for specific industries and conditions. Heavy Duty Lead Heavy Duty Clip version is...

Direct Connection Lead with Telco Clip

July 12, 2018August 25, 2022

Live Plug Connector

July 12, 2018June 1, 2023

The Live Plug Connector (LPC separation filter) is used to safely inject a locate frequency onto a live street distribution cable using a standard household mains socket from a building. This allows the cable to be traced from the premises to the connection in the street. The LPC separation filter is useable with...

Vehicle Charging Lead

July 12, 2018July 19, 2018

The 12V vehicle charging lead will charge a locator’s Li-Ion rechargeable battery pack from an automotive cigarette lighter socket. This 12ft/4m lead makes it easy to stay charged up while on the go.

vLoc3 Accessory A-Frame

July 12, 2018July 27, 2023

The vLoc3 Series Accessory A-Frame accessory is used to detect ground faults on pipes and cables. In the case of pipes, the faults consist of coating defects. In the case of cables, faults are usually caused by insulation damage that allows the metallic sheath (or internal conductor) to contact the ground. It is intended to...

Rechargeable Receiver Battery

July 12, 2018August 23, 2018

The rechargeable battery kit for the vScan receiver is supplied with a charger assembly and custom Lithium-ion battery. Lithium-ion batteries are high capacity, do not develop a memory and can hold a charge for an extended amount of time.

vLocPro Receiver

July 7, 2018October 12, 2018

The vLocPro system provides the functionality required by experienced field and the simplicity needed by novices. The system has a classic look with an intuitive user interface designed to minimize training needed when transition from other manufacturers' equipment. Different and more application specific user interfaces will become available as new features and accessories are introduced....

vLocDM Defect Mapper

July 6, 2018October 12, 2018

The vLocDM is used to collect data for pipeline coating evaluation. Optional Bluetooth / GPS enables detailed and accurate locate and location data to be stored. The locater response is displayed in a new simplified and intuitive way, incorporating the signal response, both left / right alignment (compass) data. Replaced by: vLocDM2 (Defect Mapper)